Monday, 18 April 2016

Lovely day out yesterday

I had these three lovely ladies visiting (my sisters in law) on the boat for a jolly.

Quite my favourite ladies



The three monkeys


The intrepid one
Instead of a Sunday roast dinner they had to make do with homemade parsnip soup!  However after many family birthday parties held at my house they know not to expect a large spread anymore.  They of course always catered brilliantly with homemade birthday cakes and the obligatory trifle.  I digress.

We didn't go far but it did include one lock and I deliberately  let the boat drift against the weir above the lock.  I casually said to Jill as she was the one sitting on the puppy pad that she had to go and pole us off at the front and blow me she just got up and walked down the roof and picked up the correct pole and did it.  No questions, no quibbling, no worries.  I was well impressed - no action shots as I was busy at the back end.  Her sister managed a couple but as they were of her backside I don't think she would want them published anyway!

The weather was good too so all in all very pleased with the day.  I think they might come visit again.  They are certainly very welcom.

Wednesday, 13 April 2016

Bag

So I spent the weekend on a leather bag making course.

The curly stuff is the lacing and the small piece bottom left is how to start and finish - apparently.


and I appear to have come away with some meccano!

I am a bit cheesed off if I am honest.  I wanted a bag, I designed the bag before I got there, I was hoping to come away with the finished article.  However the whole of Saturday morning was spent listening to him talk about all the tools and different types of leather etc etc Saturday afternoon we made templates for our bags out of paper for stapling together to make sure we had our dimensions correct before unstapling ready for him to cut the patterns out of the half a cow.

However there were 5 of us and only 1 cutting board.  A lot of wasted time.  Very, very frustrating.

So Sunday morning I was there bright and early (9.30) as were two others bit more chat and discussion and then he laid all the pieces out on the hide to work out the most efficient cutting and keeping the spine for straps etc.  It was about 11.30/12pm before the first pieces were handed back to us for trimming.  We now had two cutting boards - the second one was big enough for maybe three people to use but still only two cutting implements.  And then for punching holes - only two implements.  Aaaarrgh.

The course finished at 4pm.  At 3pm I was really beginning to panic.  I was nowhere near done as I had an inner pocket in my bag.  The course leader said he would punch my holes while I worked out where they should go.  In the panic I made a mistake with my straps thinking there should be a buckle at the other end so had to cut off a bit more off the length (hope they are still long enough).  At 4.30pm I finally left (the last person) without it turns out punching any holes in my straps, without finishing the leather (nobody did), without having any colour on the leather (one person did) and without doing any lacing (nobody did). 

Now we knew we might be lacing at home but to not have had time to tidy up the edges and do any dyeing is a bit much.

In my humble opinion he should have cut out the patterns from the cowhide Saturday evening ready for us to do what we had to do on the Sunday morning.

Now for those others on the course that had an interest in leather making before and therefore had some tools at home, going home with unfinished leather is probably ok.  But for those like me that haven't ...

Anyway I popped into Matlock with my 'bag' and visited a leather place to buy some dye and finishing stuff and they very kindly lent me a punch set so I could do the last set of holes.  How brilliant was that?  I have done them and will return the set tomorrow.  They also gave me information on how best to finish the leather off without buying loads of equipment I may never use again.  So I am feeling a little better about how this bag may turn out.

Not convinced that I have sufficient lacing to do all that has to be done but the course leader only lives in the next village and he said no problem if more was needed.  But a lot of work still needs doing before I can assemble my meccano.  I will show you the finished article as and when but don't hold your breath

Wednesday, 30 March 2016

We are on the road again, wearing different clothes again

So I spent last night on the boat amidst utter chaos. 

This morning I attempted to locate stuff that I really didn't need on the boat while the car was right there next to the boat and generally make room.  Of course with emptying the engine room at the beginning of winter for the work that never got done you can imagine delving into cupboards and hidey holes was tricky.  No doubt I have missed loads but hey the girl can carry it for another year!

I have treated myself to a lovely new mifi EE (Argos annoyingly didn't have the O2 one in stock) and good job too.  I had to do the last lot of wages for 2015/2016 today.  It works brilliantly so far.

I have done my first bit of boating for the year by heading East and turning around. 

This year, my son, I am mostly going West.

I put my painted portholes in this morning and I am very pleased with how they look.

Chuffed I am, chuffed.

Right off to finish de winterising and putting stuff away.


Tuesday, 22 March 2016

Success and disappointment

Last week me and a bunch of single handed women met up and walked the Wey and Arun canal.  The path deviates from the canal a fair bit and is called the Wey South but all 7 of us completed it and we enjoyed the route.

Day one is pretty much either along the old railway line and across fields with occasional crossings of the canal.  That was okay as there was a lot of chat and catching up to do so not having to pay too much attention to the route was a bonus.  Although the advance party did get mislaid at one point and we had to retrace our steps.  When we caught up with the two stragglers (who had the guide book) there was some comment on the hare and the tortoise!

Day two was the longest but mostly along the canal and a good few miles of the canal were in water with boats.

Day three was the hardest as it involved a good few bridle paths which were very churned up and made it difficult to walk.  Especially for those with dodgy knees and or hips.  Plus a good few hills.  South Downs you know.

36 miles walked in total.

The beginning

There was a boat moored just beyond the bund that had been put in so they could repair the bridge.  Definitely a continous moorer!
View of a lockhouse (much extended)
We spoke to a couple living in part of the above lock house and he was a South African and she it turned out was also a boater and she was moored next to the son of one of the women!
Small world hey


This picnic area is made up of lock beams supported by sawn up lock ladders with a table made out of the paddles.


Lunch on day two with three boats in the background.  Dayboat, narrowboat and a broadbeam!

The visitor centre is behind this pub.
  
The Pickupstuffers
Like we didn't have enough to carry.  One of us has a proper working boat and she has been looking for ages for some milk crates as they are perfect for holding the tarps off the top planks.  Apparently.

Water wheel raising water from the river into the canal which then goes over the river in an aquaduct.


 


End of day three lunch time.
Well we had done 10 miles before lunch and none of us could get the enthusiasm to do another 4 miles along the river Arun.  Technically we had done the Wey and Arun Canal and that was good enough for us.  Luckily we had left a car here because one of us was leaving early and needed to leave her bags in the car that would take her to the train station.  Otherwise we would have had no choice but to carry on to where the two end cars were waiting.

Panda and friend.

We stayed 4 nights at the Travel Lodge Billingshurst.  They allow dogs no problem which is useful to know.  Breakfasts were had at 'Billys on the road' and the choice was incredible.  My parents told me it used to be a Little Chef and always appeared to be empty.  Now it is very, very popular.  Open 7am to 7pm.

The disappointment?  No work done on the boat.  I have cancelled it for this year.  Snarpip.



Sunday, 13 March 2016

March marches on

and disappointingly still the work hasn't started on the engine room.  It is promised to be done by the end of March but I am beginning to think that maybe it has been left too late.  Very very annoyed as he has had the key since the beginning of December.  Grrrrr.

Still when I visited the boat today I took the opportunity of the lovely weather to make a start on removing the green grime from the roof and back counter.  When we set off Bobcat won't look quite so uncared for.

And then a serendipitous meeting with Geoff ended with a quick lunch in Tesco's of Rugeley where we discussed our route plans for this year.  We sure know how to live!  Toasted cheese and onion sandwich - none of that panini nonsense.

That is the good thing about having an orange panda!  He caught sight of it as he drove by and took a detour to call at the boat and this cheered me up no end.  Roll on April.

Only two days till I start walking the Wey and Arun Canal.  Hope the weather stays like this for it.

Sunday, 28 February 2016

February

is nearly over.  Lovely weather for walking - mostly and yesterday and today were no exception.  Yesterday I was thrown out of  a moving car and walked home.  Made a nice change from the usual circular walks and I got chatting to a fellow walker while we were headed in the same direction.

Today we walked to Middleton in order to look at a plot of land for sale.  Not that we wanted to buy it but we were curious as to where it was and it gave us a destination.  Coming home we diverted off the High Peak Trail and tried to find our way over the fields.  Suffice to say we entered the fields at the correct point and exited at the correct point but somewhere in the middle we lost the path and did some creative walking.  Which involved a fair bit of climbing over fences/walls etc.  Made it more exciting and adventurous.

I have been playing with stained glass at home and have realised that you need the correct soldering iron - none of dearly beloved's were suitable as they keep going cold and the solder won't run.  So I need to buy a specific one. 

The kitchen is the only place to work in and I have done my best to clear up after myself but the next time I am cutting glass I think I will put up a cardboard barrier to minimise the risk of us ingesting ground glass in future!

In March the boat finally starts to have the works done in the engine room that I have been waiting for all winter - so definitely no boating yet.  However there is that 3 day walk I am doing along the Wey and Arun canal which means I will still get my canal fix.


Saturday, 13 February 2016

And now in glorious technicolour


Showing my age here?

Any hoo

here we have for your delectation - my unfinished bit of stained glass window decoration



We completely ran out of time so the welding is untidy.  I need to get some solder and flux and smooth everything out at home as I only had time to basically attach all the pieces to each other and fit the hanging loops - no time for finesse.  One more week and it would have been perfick.

I wanted the blue water element to be much darker blues purples etc and the top sunset to be more yellows oranges and reds but I had to use what was available.  Still I like it.
Works the other way up with blue sky and dark canal water!!!

And yes my fixation with having my stove in the 'correct' place has led to it not being a mirror image.
Quirky I call it
 
Then the ones I painted direct onto my portholes.  
(I have two 'spare' due to the fused glass bobcat portholes made by Bonnie. http://www.purpleglass.co.uk )

Can you guess what this one represents?










I will tell you. 
It is the Trent and Mersey Canal.

Harecastle Tunnel
The potteries
Rugeley/Willington power stations
Burton on Trent Breweries.

Then I thought dearly beloved needed to be represented as well.

I am represented by the bobcat portholes so here is his

May I introduce 
Ratty




I took photos of some of the other work done at the stained glass workshop



This one I think it is brilliant
On the left her father then she got carried away and included her mother.  
Both back in their hippy days!



 
I also love the curves on this one






and this one 
although I think this lady forgot to allow space for the fusing.

It all fitted perfectly until the copper foil was added.  
Which was a shame.



There it is - my foray into stained glass.
Absolutely loved it. 
 
Looking forward to installing them on the boat
 and 
looking through them 
whilst I float around England and Wales this year.